Beale 851st SMS - Entry Portal Blueprints

More Info

Any gaps in the list of drawings will be marked as either MISSING or DELETED. Missing drawings are simply ones I don't have, whereas deleted drawings were removed from the set by the drafting company or contractor. This latter group means that a drawing might exist, but was not part of the as-built set of final plans, or was later modified.

The Entry Portal blueprints are further broken down into the following sub-groups as shown in the following table and can be directly selected below to jump to those groups of drawings.

At this time, there are no drawings available in the following sub-groups: Architectural, Composite and HVAC.

There are currently 34 drawings in the Entry Portal section.

NOTE: Drawing descriptions may be truncated and/or abbreviated to remove redundant text and maintain brevity in limited cell space.

Drawing Types

The following table provides quick selection of the types of drawings in the Entry Portal section. You can choose a category below, or scroll down to see everything in order.

Sub-group Description
A Architectural
CP Composite
E Electrical
H HVAC
M Mechanical
P Plumbing/Piping
S Structural

Entry Portal - Architectural drawings (0)

Drawing Number Description
-- N/A

Entry Portal - Composite drawings (0)

Drawing Number Description
-- N/A

Entry Portal - Electrical drawings (6)

Drawing Number Description
EP-E1 LIGHTING AND POWER LAYOUT
EP-E2 TELEPHONE & COMMUNICATIONS LAYOUT
EP-E3 DELETED
EP-E4 PERSONNEL BLAST LOCK & PORTAL DOOR SCHEMATIC & MISC DETAILS
EP-E5 DOOR SCHEMATIC DIAGRAM & DETAILS
EP-E6 DELETED
EP-E7 DOOR SCHEMATIC DIAGRAM & DETAILS
EP-E8 DOOR SCHEMATIC DIAGRAM & DETAILS

Entry Portal - HVAC drawings (0)

Drawing Number Description
EP-H1 DELETED
EP-H2 DELETED

Entry Portal - Mechanical drawings (12)

Drawing Number Description
EP-M1 SURFACE CLOSURE GENERAL ASSEMBLY
EP-M2 SURFACE CLOSURE HARDWARE & DOOR DETAILS
EP-M2 SURFACE CLOSURE HARDWARE & DOOR DETAILS *
EP-M3 SURFACE CLOSURE OPERATING EQUIPMENT & CONTROL
EP-M4 SURFACE CLOSURE MISC DETAILS SHEET I
EP-M5 SURFACE CLSOSURE MISC DETAILS SHEET II
EP-M6 LOWER BLAST DOOR ASSEMBLY & DETAILS
EP-M7 PERSONNEL SURFACE HATCH ASSEMBLY & DETAILS
EP-M8 DELETED
EP-M9 DELETED
EP-M10 INSTRUMENTATION MOUNT ARRANGEMENT & DETAILS
EP-M11 INSTRUMENTATION MOUNT MISC DETAILS
EP-M12 REVOLVING GATE ASSEMBLY & DETAILS
EP-M13 REVOLVING GATE MISC DETAILS

Entry Portal - Plumbing/Piping drawings (2)

Drawing Number Description
EP-P1 UPPER & LOWER PLANS PLUMBING
EP-P2 SECTIONS PLUMBING

Entry Portal - Structural drawings (14)

Drawing Number Description
EP-S1 PLAN AND SECTIONS
EP-S2 PLANS AND SECTIONS
EP-S3 SECTIONS
EP-S4 SECTIONS & DETAILS
EP-S5 DELETED
EP-S6 INSTRUMENT MOUNT DETAILS & SECTIONS
EP-S7 SECTIONS & DETAILS - INTERIOR
EP-S8 FRAMING SECTIONS INTERIOR - I
EP-S9 FRAMING SECTIONS INTERIOR - 2
EP-S10 FRAMING SECTIONS INTERIOR - 3
EP-S11 INTERIOR STRUCTURE SECTIONS
EP-S12 SECTIONS & DETAILS INTERIOR
EP-S12 SECTIONS & DETAILS INTERIOR *
EP-S13 SECTIONS & DETAILS
EP-S14 PERSONNEL ENTRANCE STRUCTURE
* This drawing is a duplicate of another with the same drawing number. Duplicates may comprise an earlier or later revision of the same drawing, or may simply be a separate copy with different markings or in different condition.