More Info

Any gaps in the list of drawings will be marked as either MISSING or DELETED. Missing drawings are simply ones I don't have, whereas deleted drawings were removed from the set by the drafting company or contractor. This latter group means that a drawing might exist, but was not part of the as-built set of final plans, or was later modified.

The Control Center blueprints are further broken down into the following sub-groups as shown in the following table and can be directly selected below to jump to those groups of drawings.

There are currently 15 drawings in the Control Center section.

NOTE: Drawing descriptions may be truncated and/or abbreviated to remove redundant text and maintain brevity in limited cell space.


Drawing Types

The following table provides quick selection of the types of drawings in the Control Center section. You can choose a category below, or scroll down to see everything in order.

At this time, there are only drawings available in the Architechtural, Mechanical, and Structural sub-categores for the Control Center category drawings. I hope more will be located and added in the future.

Sub-group Description
A Architectural
C Civil (NONE AVAILABLE)
CP Composite (NONE AVAILABLE)
D Civil (NONE AVAILABLE)
E Civil (NONE AVAILABLE)
M Mechanical
P Civil (NONE AVAILABLE)
S Structural

Control Center - Architechtural drawings (6)

Drawing Number Description
87-A-1 UPPER LEVEL PLAN
87-A-2 LOWER LEVEL PLAN
87-A-3 MISSING *
87-A-4 SECTIONS
87-A-5 DETAILS & SCHEDULE
87-A-6 ELEVATIONS & DETAILS
87-A-7 UPPER LEVEL EQUIPMENT PLAN & SCHEDULE

Control Center - Civil drawings (0)

Drawing Number Description
-- N/A

Control Center - Composite drawings (0)

Drawing Number Description
-- N/A

Control Center - Details drawings (0)

Drawing Number Description
-- N/A

Control Center - Electrical drawings (0)

Drawing Number Description
-- N/A

Control Center - Mechanical drawings (3)

Drawing Number Description
87-M-1 AIR CONDITIONING PLAN LOWER LEVEL
87-M-2 MISSING *
87-M-3 AIR CONDITIONING SECTIONS
87-M-4 AIR CONDITIONING SECTIONS & DETAILS

Control Center - Plumbing drawings (0)

Drawing Number Description
-- N/A

Control Center - Structural drawings (6)

Drawing Number Description
87-S-1 GROUND FLOOR PLAN
87-S-2 GROUND FLOOR PLAN
87-S-3 MISSING *
87-S-4 MISSING *
87-S-5 MISSING *
87-S-6 MISSING *
87-S-7 SHOCK MOUNTING DETAILS
87-S-8 SHOCK MOUNTING SECTIONS & DETAILS
87-S-9 MISSING *
87-S-10 DOME SECTION
87-S-11 MISSING *
87-S-12 TUNNEL OPENING DETAILS
* Drawing is thought to be missing, meaning that it is thought to be in the index, but unavailable. This drawing's existence is only suggested by another drawing with a higher number. E.g., If a drawing such as 92-S-3 exists, it is reasonable to infer that 92-S-1 and 92-S-2 also likely exist. It is possible however, that some drawings which are expected to exist may have been deleted from the drawing index, so there is no certainty that these drawings actually exist, and so these entries should only be considered as placeholders.
Drawing title is woefully illegible and may not be accurate. Every effort has been made to discern the title's correct text, but some extrapolation, inference and outright guessing was required to arrive at a title for this drawing. In some cases a series of underscore characters ( ___ ) have been used to indicate the prescence of missing text that simply could not be positively identified.